AMX NI-2100/3100/4100 - Manual (Page 57)

WebConsole - System Options
49 NI Series WebConsole & Programming Guide
Repeat steps 1-3.
Alternatively, you can click one of the Edit buttons to open the Edit Options window, and
specify a System Number, Device and Port for a known System Device. Select the Diagnostics
messages that you want to enable for this device and click Update.
The device will appear in the Diagnostics Options window, in the next available column (to
the right of the last device added - see FIG. 35).
Diagnostics Options Definitions
The following table describes each of diagnostics options that can be enabled via the Edit Options
window:
FIG. 35 Edit Options window indicating four devices with Diagnostics enabled
You can monitor diagnostics for up to eight System Devices in this page.
Diagnostic Options
Diagnostic Option Description
All Notifications: Enables every notification field.
System
• Number
• Device
• Port: Use these fields to enter a device:port:system (D:P:S) combination for the device for
which you want to enable notifications.
A value of 0 for any option gives you all of the systems, devices, or ports. This dialog
also allows you to store/recall presets.
Messages
• Online/Offline Generates a message when there is a change in the target device’s online/offline
status.
• Configuration Generates a message when there is a change in the target device’s configuration.
• Status Generates a message when there is a change in the target device’s status.