Allied Telesis AT-S68 - Manual (Page 87)

AT-S67 and AT-S68 User’s Guide
87
Running a Self Test
To run a test on each of the chip sets, perform the following procedure:
1. From the Main Menu, type 8 to select Diagnostics. The Diagnostics
Menu in Figure 30 on page 86 is displayed.
2. Type 2 to select Self Test Status. The Show Self Test Status window in
Figure 31 is displayed.
Figure 31 Show Self Test Status Window
The information in this window is for viewing purposes only.
The following prompt is displayed.
Press any key to continue...
3. Press any key to return to the Diagnostics Menu.