Allied Telesis AT-S68 - Manual (Page 66)

Quality of Service (QoS)
66
Resetting the QoS
To reset the QoS parameters back to the factory default, preform the
following procedure:
1. From the Main Menu, type 3 to select QoS Menu. The QoS Menu in
Figure 23 on page 63 is displayed.
2. Type 6 to select Reset QoS Settings. The following prompt is
displayed:
Do you really want to Reset? [Y]es [N]o:
3. Type Y to continue.
4. You will be returned to the QoS Menu.
5. Type S to Save QoS Settings. The following confirmation prompt is
displayed:
Success - Press any key to continue...
The QoS parameters have been reset back to the factory defaults.