Allied Telesis AT-S68 - Manual (Page 55)

AT-S67 and AT-S68 User’s Guide
55
The Modify VLAN Menu is displayed showing the current VLAN ID
and the port(s) members. You can now change the VLAN ID or the
port members of the VLAN.
5. Type 2 to select Ports. The following prompt is displayed:
Enter new value ->
6. Enter the new value and press .
7. Type M to select Modify VLAN.
8. The following message is displayed:
Modifying VLAN. Please wait...
9. Type S to select Save VLAN Configuration. The following confirmation
prompt is displayed:
SUCCESS - Press any key to continue...
The VLAN has been modified. Repeat this procedure starting with Step 3
on page 54 to modify additional VLANs.