Configuring advanced mirroring – Allied Telesis AT-S68 User Manual
Page 41
AT-S67 and AT-S68 User’s Guide
41
Configuring Advanced Mirroring
The advanced mirroring configuration allows the user to filter the
source’s mirrored traffic by mirroring divider and MAC address for either
receive (RX) or transmit (TX) data.
To configure the advanced port mirroring parameters, perform the
following procedure:
1. From the Main Menu, type 1 for Port Menu. The Port Menu in Figure
2. From the Port Menu, type 2 for Port Mirroring Menu. The Port
Mirroring Menu in Figure 13 on page 37 is displayed.
3. Type 2 to select Advanced Mirror Configuration. The Advanced Mirror
Configuration Menu in Figure 15 is displayed.
Figure 15 Advanced Mirror Configuration Menu
4. Select one of the following:
1 - Source Port RX Configure
This option will configure the source port’s receive mirroring filter.
2 - Source Port TX Configure
This option will configure the source port’s transmit mirroring
filter.