Allied Telesis AT-S68 - Manual (Page 40)

Port Mirroring
40
Deleting a Port Mirror
To delete a port mirror, perform the following procedure:
1. From the Main Menu, type 1 to select Port Menu. The Port Menu in
Figure 3 on page 18 is displayed.
2. From the Port Menu, type 2 to select Port Mirroring. The Port
Mirroring Menu in Figure 13 on page 37 is displayed.
3. Type 1 to select Destination Mirror Port. One of the following prompts
will be displayed:
For an AT-FS7016 switch:
Select port(1-16, 0 to disable):
For an AT-FS7024 switch:
Select port(1-24, 0 to disable):
4. Type 0 (zero) and press .
5. Type S to select Save Mirror Configuration.
The port mirror on the switch is deleted. The port that was functioning as
the port mirror is now available for normal network operations.