Allied Telesis AT-S68 - Manual (Page 33)

AT-S67 and AT-S68 User’s Guide
33
Resetting Port Trunks
To reset the port trunk, perform the following procedure:
1. From the Main Menu, type 1 to select Port Menu. The Port Menu in
Figure 3 on page 18 is displayed.
2. From the Port Menu, type 3 to select Port Trunking. The Port Trunking
Menu in Figure 9 on page 27 is displayed.
3. Type 4 to select Reset Trunk Configuration. The following prompt is
displayed:
Are you sure you want to Reset All Trunk Groups
(Y/N) ->
4. Type Y to reset the trunk configuration.
5. Type S to select Save Configuration Changes.
The port trunks have been reset back to the factory default.