Allied Telesis AT-S68 - Manual (Page 75)

AT-S67 and AT-S68 User’s Guide
75
Resetting the Switch
To reset the switch back to the factory default settings, perform the
following procedure:
1. From the Main Menu, type 5 to select System Config Menu. The
System Config Menu in Figure 26 on page 74 is displayed.
2. Type 2 to select Reset to Factory Defaults. The following confirmation
prompt will be displayed:
Do you want to Restore Settings to Factory
Defaults? [Y]es or [N]o:
3. Type Y to continue.
You will be returned to the System Config Menu.
The switch has been reset back to the factory defaults.