Allied Telesis AT-S68 - Manual (Page 65)

AT-S67 and AT-S68 User’s Guide
65
10. Type P to select the port you wish to set. One of the following
prompts will be displayed:
For an AT-FS7016 switch:
Enter Port Number [1 - 16] ->
For an AT-FS7024 switch:
Enter Port Number [1 - 24] ->
11. Enter the port number and press . The following prompt will
be displayed:
Enter new value [H - High L - Low] ->
12. Type H or L to select the port priority.
13. To set another port, type P and repeat steps 10 through 12 or type R
to return to the QoS menu.
14. From the QoS Menu, type S to Save QoS Settings.
The QoS parameters have been set.