Allied Telesis AT-S68 - Manual (Page 58)

Virtual LANs
58
Clearing All VLANs
To clear all VLANs, perform the following procedure:
Note
The default VLAN VID of 1 cannot be deleted.
1. From the Main Menu, type 2 to select VLAN Menu. The VLAN Menu in
Figure 17 on page 50 is displayed.
2. From the VLAN Menu, type 1 to select Configure VLANs. The
Configuring VLANs in Figure 18 on page 51 is displayed.
3. Type 4 to select Clear All VLANs. The following prompt is displayed:
Are you sure you want clear all VLANs (Y/N) ->
4. Type Y to clear all VLANs and press .
The following confirmation prompt is displayed:
SUCCESS - Press any key to continue...
5. Type S to Save VLAN Configuration. The following confirmation
prompt is displayed:
SUCCESS - Press any key to continue...
All VLANs have been deleted.