Allied Telesis AT-S68 - Manual (Page 68)

Switch Administration
68
Changing the Login Password
The login password prevents unauthorized access to the local
management session. Any user who starts a management session will be
required to enter the password. The AT-S67 and AT-S68 management
software’s default password is “friend”.
To change the login password, perform the following procedure:
1. From the Main Menu, type 4 to select Administration Menu. The
Administration Menu in Figure 25 is displayed.
Figure 25 Administration Menu
2. From the Administration Menu, type 1 to select Set Login Password.
The following prompt will be displayed:
Enter Current Login Password:
Note
If you enter an invalid password, the switch will not allow the
current password to be changed.
3. Type the current password and press . The following prompt
will be displayed:
Enter New Password: