beautypg.com

Configuring port parameters – Allied Telesis AT-S68 User Manual

Page 18

background image

Port Configuration

18

Configuring Port Parameters

To configure the parameter settings for a port on the switch, perform the
following procedure:

Note

You can only configure one port at a time.

1. From the Main Menu, type 1 to select Port Menu. The Port Menu in

Figure 3 is displayed.

Figure 3 Port Menu

2. From the Port Menu, type 1 to select Port Configuration. one of the

following prompts is displayed:

For an AT-FS7016 switch

Enter Port Number [1 to 16] ->

For an AT-FS7024 switch

Enter Port Number [1 to 24] ->

This manual is related to the following products:
See also other documents in the category Allied Telesis Computer hardware: