Allied Telesis AT-S68 - Manual (Page 30)

Port Trunking
30
Deleting a Port Trunk
Caution
Disconnect the cables form the port trunk on the switch before
performing the following procedure. Deleting a port trunk without
first disconnecting the cables can create loops in your network
topology. Data loops can result in broadcast storms and poor
network performance.
To delete a port trunk, perform the following procedure:
1. From the Main Menu, type 1 to select Port Menu. The Port Menu in
Figure 3 on page 18 is displayed.
2. From the Port Menu, type 3 to select Port Trunking. The Port Trunking
Menu in Figure 9 on page 27 is displayed.
3. Type 2 to select Delete Trunk. The Delete Trunk Menu in Figure 11 is
displayed.
Figure 11 Delete Trunk Menu