Allied Telesis AT-CV5001 - Manual (Page 75)

AT-CV5001 Media Converter Chassis Installation Guide
75
6. Gently slide the module from the unit.
Figure 40. Removing the AT-CV5001AC Power Supply
Note
Use care when pulling the power supply from the chassis. If you
roughly pull the module from the unit, you might bend the power and
control pins on the backplane connectors.
7. To install a new module, refer to “Installing the AT-CV5001AC Power
Supply” on page 38.
8. If you are not installing a new module, install the slot cover and secure
it to the chassis by tightening the captive screws.
A
A
WARNING
This unit might ha
ve more than one p
ower input
. To reduce the risk
of electric sho
ck, disconnect all po
wer inputs be
fore se rvicing unit
.
o
AT-CV5001DC
FOR CE
NTRALIZ
ED
RESTR ICTED A
REA.
INSTALL O
NLY IN A
CONNE
CTION,
DC PO WER
DISCONNECT ALL P
OWER SOURCES & REFER TO MANU
AL BEFORE SE
RVICING
40-60VDC
1678