Allied Telesis AT-CV5001 - Manual (Page 43)

AT-CV5001 Media Converter Chassis Installation Guide
43
Installing the AT-CV5001DC Power Supply
The AT-CV5001DC Power Supply can be installed in either slot A or slot B
on the read panel.
Note
The AT-CV5001 Chassis can contain two power supplies. The
power supplies can be of the same type (AC or DC) or different
types (AC and DC).
Note
The power supply module is hot-swappable. If the chassis already
has a power supply that is powered on, you do not have to power off
the unit to install the new power supply module.
To install the AT-CV5001DC Power Supply, perform the following
procedure:
1. Remove the AT-CV5001DC Power Supply from its shipping package
and store the package in a safe place.
Note
You must use the original package if you need to return the unit to
Allied Telesis.
2. Verify the package contents.
Table 4. AT-CV5001DC Power Supply Component
One AT-CV5001DC Power Supply
AT-CV 5001D C
FOR CENTRALIZED
RESTRICTED AR EA.
INST ALL ONL Y IN A
CONNECTIO N,
DC PO WER
DISCON NECT A LL POW ER SOU RCES &
REFER TO MANUA L BEFO RE SER VICING
40-60VD C
1690