Allied Telesis AT-CV5001 - Manual (Page 25)

AT-CV5001 Media Converter Chassis Installation Guide
25
Note
The card has a Reset button you can use to reset the AT-CV and
AT-CM2 Media Converter Cards in the chassis. The cards initialize
their management software. Resetting the line cards may result in
the loss of some network traffic. The reset button does not affect the
AT-CV5M02 Management Card or the AT-CM3 Media Converter
Cards.
The AT-CV5LED Card does not use management software.
Note
The AT-CV5LED Card must only be serviced by an Allied Telesis
technician. If the card develops a problem, contact Allied Telesis for
assistance.
PS-B Green The power supply in slot B is
operating normally.
OFF The power supply in slot B is powered
off or has failed. The LED will also be
off if the slot is empty or if the input
power from the power source is
outside the operating range of the
power supply module.
FAN-A Steady
Green The fan in the power supply installed
in slot A is operating normally.
OFF The power supply in slot A fan has
failed, the fan has failed, or the slot is
empty.
FAN-B Steady
Green The fan in the power supply installed
in slot B is operating normally.
OFF The power supply in slot B fan has
failed, the fan has failed, or the slot is
empty.
Table 1. Status LEDs on the AT-CV5LED Card (Continued)
LED State Description