Allied Telesis AT-CV5001 - Manual (Page 35)

AT-CV5001 Media Converter Chassis Installation Guide
35
4. Attach the brackets to the sides of the chassis using four screws
(provided) on each side, as shown in Figure 8
Figure 8. Installing the Brackets
5. Mount the chassis in the equipment rack using appropriate screws (not
provided), as shown in Figure 9.
Caution
The chassis is heavy. Physical injury may result if you attempt to
install the chassis without assistance. Two people should hold the
unit while a third person secures it to the rack.
Figure 9. Mounting the AT-CV5001 Chassis in a 19-inch Equipment Rack
FAN1
PS1 RDY
A T -CV5001
RDY MS TR FLT
RESET L INE/SFM
PS-A PS -B
FAN-A FA N-B
Allied T
elesis
1642
FAN1
PS1
RDY
RDY MS TR FLT
RESET L INE/SFM
PS-A PS-B
FAN-A FA N-B
1661