Allied Telesis AT-CV5001 - Manual (Page 16)

Chapter 1: Overview
16
AT-CV5001 Chassis Overview
The AT-CV5001 Chassis is a member of the Converteon family of media
converter products. The product is used to aggregate large numbers of
geographically separate Fast Ethernet or Gigabit Ethernet networks into a
central location, over fiber optic cables. The features of the chassis are:
 Eighteen slots for media converter line cards and the AT-CV5M02
Management Card
 Two slots for primary and redundant AC or DC power supplies
 Support for all AT-CV, AT-CM2, and AT-CM3 Series Media Converter
Cards, as well as the double-slot AT-CM70S Media Converter Card
 Support for the AT-CV5M02 Management Card
 Variable fan speed control
 Rack-mount or tabletop installation
 Operations, Administration, and Maintenance (OAM) with the
AT-CV5M02 Management Card
Figure 1. AT-CV5001 Chassis
The chassis supports all the same features as the AT-CV5000 Chassis,
including Operations, Administration, and Maintenance (OAM). This
feature lets you perform loopback tests between the media converter
cards and remote devices, receive notification of power supply problems
at remote sites with the dying gasp and the first RPS failure signals, and
more. For descriptions of the OAM features, refer to the AT-S73, AT-S99,
and AT-S102 Management Software User’s Guide.
Note
The chassis does not come with a power supply, Power supplies
must be ordered separately.
1648
FAN1
PS1 RDY
A T -CV5001
RDY MSTR FL T
RESET L INE/SFM
PS-A PS -B
FAN-A FA N-B
Allied T
elesis