Allied Telesis AT-CV5001 - Manual (Page 32)

Chapter 2: Installation
32
Unpacking the Chassis
To unpack the chassis, perform the following procedure:
1. Remove all the components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Make sure that the following components are included in the package.
If any item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
Table 2. AT-CV5001 Chassis Components
One AT-CV5001 Chassis
One pre-installed AT-CV5LED
Card in slot 19
Two rack-mounting brackets
Eight flathead Phillips rack-
mounting bracket screws
1648
FAN1 PS1 RDY
A T -CV5001
RDY MS TR FLT
RESET L INE/SFM
PS-A PS -B
FAN-A FA N-B
Allied T
e lesis
RDY F LT M ASTER
RESET LINE/SFM
PS-A P S-B
FAN-A FAN-B
1645