Samsung SM-G900VZDAVZW - Manual (Page 103)

96
• Smart network switch: When enabled, your phone will
automatically switch between known Wi-Fi networks and
mobile networks. Known Wi-Fi networks are those you have
already connected to.
• Install certificates: If you have certificates stored on an
installed optional memory card (not included), you can use this
option to install the certificates.
• MAC address: (Not configurable) View your device¡¦s MAC
address, needed for connecting to some secured networks.
• IP address: (Not configurable) View your device’s IP address.
Wi-Fi Direct Settings
Wi-Fi Direct allows devices to connect to each other directly
via Wi-Fi, without a Wi-Fi network or hotspot, and without
having to set up the connection. For example, your device
can use Wi-Fi Direct to share photos, contacts and other
content with other Wi-Fi Direct devices.
1. From the Wi-Fi settings screen, tap Menu > Wi-Fi
Direct. Your device automatically scans for nearby Wi-
Fi Direct devices, or you can tap Scan to start scanning.
2. After scanning for devices, select a device, and then
follow the prompts to complete the connection.
– or –
Tap Menu > Multi connect to scan for devices that
support multi connect. Select the devices and follow
the prompts to establish the connections.
Bluetooth Settings
Bluetooth is a short-range wireless communications
technology for exchanging information over a distance of
about 30 feet. You don’t need to line up the devices to send
information with Bluetooth. If the devices are in range, you
can exchange information between them, even if they are in
different rooms.
Your device can use Bluetooth to share photos, contacts and
other content with other Bluetooth devices.
Many of the apps on your device provide options for sharing
via Bluetooth under
Menu, or with the Share icon.
1. From the home screen, tap Apps > Settings >
Bluetooth, and then configure these settings:
• Tap the ON/OFF switch to turn Bluetooth on or off.
• Tap your device’s name to enable or disable visibility to other
Bluetooth devices. When your device is visible, other devices
can find your devices during a scan. Your device remains visible
for the period of time set in the Visibility timeout setting.