Samsung SC-DX103-XAP - Manual (Page 97)

91_ English 中文 _ 91
INSTALLING DV MEDIA PRO
When you install the DV Media PRO software on your Windows computer,
you can enjoy the following operations by connecting your DVD camcorder
to your computer via a USB cable.
- View Movie Recordings and Photos on PC: DV Driver, DirectX9.0, Video
Codec
- PC cam/USB streaming function: DV Driver, DirectX9.0, Video Codec
Before your start!
• Turn on your PC. Exit all other running applications.
• Insert the provided CD into the CD-ROM drive.
The setup screen appears automatically soon after the CD is inserted. If
the setup screen does not appear, click on “Start” on the bottom left corner
and select “Run” to display a dialog. Type “D:\autorun.exe” and then press
ENTER, if your CD-ROM drive is mapped to “D:Drive”.
Installing Driver - DV Driver and DirectX 9.0
• DV Driver is a software driver that is required to support establishing
connection to a PC.
(If it is not installed, some functions will not be supported.)
1. Click on “DV Driver” on the Setup screen.
• Driver software is installed automatically. Following drivers will be
installed:
- PC Camera/USB Streaming driver(Capture Driver)
2. Click on “Confirm” to finish driver installation.
3. If the “DirectX 9.0” is not installed, it is installed automatically after setting
.
• After installing “DirectX 9.0,” please restart your PC.
If ”DirectX 9.0” is installed already, there is no need to restart the PC.
Application Installation - Video Codec
• Click on “Video Codec” on the Setup screen.
“Video Codec” is required to play movie files recorded by this DVD
Camcorder on a PC.
安装 DV MEDIA PRO
当您在 Windows 电脑上安装 DV Media Pro 软件，您可以通过 USB 数据线
将数码摄像机与电脑相连进行以下操作。
- 在电脑上观看录制的影音和照片：
DV Driver, DirectX9.0, Video
Codec
- PC 摄像头 /USB 输出功能：DV Driver, DirectX9.0, Video Codec
开始之前！
• 打开电脑。退出所有其他的应用程序。
• 将软件 CD 插入到电脑的 CD-ROM 驱动器。
在
CD 插入不久，屏幕上自动显示安装界面。如果未出现安装界面，点击
左下角的“ Start”按钮并且选择“Run”出现对话框。如果您的 CD-
ROM 光驱对应位置为“D：Drive”，输入“D:\autorun.exe”然后按下
ENTER 回车键。
安装驱动程序 - DV Driver 和 DirectX 9.0
• DV Driver 是支持建立电脑连接所需要的软件驱动程序。
( 如果没有安装，某些功能将不会受到支持。)
1. 在安装界面上单击“DV Driver”。
• 所需的驱动程序软件将会自动安装，下列驱动程序将会安装：
- PC 摄像头驱动程序 /USB 输出驱动程序 ( 捕捉驱动 )
2. 点击“Confirm” 完成驱动程序安装。
3. 如果尚未安装“DirectX 9.0”，它将会在设置“DV Driver”后自动安装。
• 安装 DirectX 9 .0 以后，需要重新启动计算机。
若已经安装 DirectX 9.0，则不需要重新启动计算机。
安装应用程序 - Video Codec
• 在设置屏幕上单击“Video Codec”。（视频编码解码器）
在计算机上播放数码摄像机录制的影片文件时，需要使用视频编码解码器。
(AD68-02550F)SC-DX100_ENG+CHN_IB.indb 91 2008-03-05 ¿АИД 8:56:26