Samsung SC-DX103-XAP - Manual (Page 53)

47_ English 中文 _ 47
DISC FINALIZE ( (
-R +R DL
))
• This function works only in the Record mode page 21
• To play the contents of a DVD-RW/-R/+R DL on other DVD players/recorders/drives,
you must fi nalize the disc.When fi nalizing, there should be enough power in the
batteries. If the AC power adaptor is to be used, make sure that the jack is properly
connected. A power cut during fi nalizing may disrupt the disc from replaying.
1. Slide the POWER switch downwards to turn on the power.
 page 21
2. Set the Storage mode switch to DISC. (SC-DX103/DX105 only)
page 30
3. Press the MENU button, then move the Joystick right or left to
select “ Disc Manage.”
4. Move the Joystick up or down to select “Disc Finalize,” then press
the Joystick.
• You can simply fi nalize the disc using the FINALIZE button on the
DVD camcorder.
5. The message “DVD needs to fi nalize for other DVD player or
recorder to be played. But no more recording is allowed after
fi nalizing.” will appear. Move the Joystick right or left to select
“ Next,” then press the Joystick.
• Disc information will appear.
6. Move the Joystick right or left to select “Execute,” then press the
Joystick.
• To exit, use the Joystick to select “Exit,” the press the Joystick.
7. Move the Joystick right or left to select “Yes,” then press the
Joystick.
• The message showing that the disc is being fi nalized will appear.
WARNING
During fi nalizing, do not cause impact or vibration to your DVD
camcorder. This could cause a malfunction.
DVD camcorder mode:
disc manage
• The fi nalize function is not available at the battery level
under ( ).
• Once fi nalized, the movie images or a playlist in the disc
cannot be deleted or edited.
• Time required for fi nalizing may differ by disc type.
• Refer to page 8 for fi nalized disc compatibility.
• Playback is not guaranteed in all DVD players/recorders/
drives. For compatibility details, refer to your DVD players/
recorders/drives owner’s manual.
• Once the DVD-R/+R DL disc is fi nalized, you cannot re-
record it in the DVD camcorder.
• You may play back DVD+RW discs on other devices
without fi nalizing them.
• You cannot make an additional recording on a DVD-RW
disc without unfi nalizing it after it is fi nalized.
光盘终结
( (
-R +R DL
))
• 此功能仅可在录制模式使用。 第 21 页
• 要在其他 DVD 播放器 / 录像机 / 驱动器上播放 DVD-RW/-R/+R DL 的内容，
必须终结光盘。在烧结时，必须保证电池内有足够的电量。如果使用适配器必
须确认插头完全的连接。在烧结的过程中断电会因为重新开始而破坏光盘。
1. 向下滑动 POWER 电源开关开启摄像机。 第 21 页
2. 切换存储模式至 DISC( 仅限 SC-DX103/DX105)。
 第 30 页
3. 按下 MENU 按钮，然后向右或向左移动操纵杆选择
“Disc Manage”( 光盘管理 )。
4. 向上或向下移动操纵杆选择 “Disc Finalize”( 光盘终结 ) 然后
按操纵杆确认。
• 您可以使用 DVD 摄像机上的 FINALIZE 按钮简单地终结
光盘。
5. 屏幕上显示提示信息 “DVD needs to fi nalize for other DVD
player or recorder to be played. But no more recording is
allowed after fi nalizing.”( 要使用其他 DVD 播放器或刻录器进
行播放，需要终结化 DVD 光盘 )。向右或向左移动操纵杆选
择 “Next,”( 下一个 )，然后按操纵杆确认。
• 屏幕上显示光盘信息。
6. 向右或向左移动操纵杆选择 “Execute”( 执行 )，然后按操纵
杆确认。
• 若要退出，使用操纵杆选择 “Exit”( 退出 ) 然后按操纵杆
确认。
7. 向右或向左移动操纵杆选择 “Yes”( 是 )，然后按操纵杆确认。
• 屏幕上显示光盘正在终结的提示信息。
警告
终结期间，请不要击打或震动本 DVD 摄像机。否则会导致
DVD 摄像机发生故障。
• 电池电量低 ( ) 的时候无法使用光盘终结功能。
• 一旦终结完成，标题清单和光盘播放清单将不能删除或编辑。
• 进行终结所需要的时间由光盘类型决定。
• 有关已终结光盘的兼容信息，请参见第 8 页。
• 不保证在所有的 DVD 播放机 / 刻录器 / 驱动器上都能播放。
有关兼容性的详情，请参阅您的 DVD 播放机 / 刻录器的使
用手册。
• DVD-R/+R DL 光盘一旦终结，则不能使用这些光盘再次
录制。
• 您可以在其他设备上播放 DVD+RW 光盘而无须对它们进行
终结处理。
• 若 DVD-RW 光盘已经终结，您必须在对它进行取消终结处
理后，才能再次进行录制。
DVD 摄像机模式：
光盘管理
STBY 0:00:00 [30 min]
Disc Manage
Disc Finalize
Disc Unfi nalize
Disc Format
Disc Info
Now Finalizing...
Avoid Shock & Vibration
Finalize
DVD needs to fi nalize for other DVD
player or recorder to be played.
But no more recording is allowed after
fi nalizing.
Next Back
Finalize
Disc Name JAN/01/2008
Disc Type DVD-RW [Unfi nalized]
Disc Format VR Mode
Used
0:10:00
Free 0:20:00 [Fine]
Exit Execute Rename
SC-DX100_ENG_CHN_2_DL.indd 47 2008-03-05 ¿АИД 9:48:13