Samsung SC-DX103-XAP - Manual (Page 92)

86_ English 中文 _ 86
connecting to AV devices
You can view the recorded movie and photo images(SC-DX103/DX105 only)
on a large screen by connecting the DVD camcorder to a TV.
CONNECTING TO A TV
• To play back your recordings, the television must
be NTSC compatible. page 102
• We recommend that you use the AC power
adaptor as the power source for the DVD
camcorder.
Use the provided AV cable to connect the DVD
camcorder to a TV as follows:
1. Connect the end of the AV cable with the single
plug to the AV jack of the DVD camcorder.
2. Connect the other end with video (yellow) and
left(white)/ right(red) audio cables to the TV.
• For more information about the connection,
refer to your TV’s user manual.
• Before connecting, make sure that the volume
on TV is turned down: forgetting this may
cause feedback from the TV speakers.
• Carefully connect the input and output
cables to the corresponding connections
on the device the DVD camcorder is being
used with.
Viewing on TV screen
1. Turn on the TV and set the input selector to the Input connection the
DVD camcorder is connected to.
- This is often referred to as “line.” Refer to the TV instruction manual
for how to switch the TV input.
2. Turn the DVD camcorder on.
- Slide the POWER switch downwards, then open the LCD screen.
- Set the appropriate storage media. (SC-DX103/DX105 only)
 page 30
- Press the MODE button to set the Play mode. page 21
- The image from the DVD camcorder will appear on the TV screen.
3. Perform playback.
- You can perform playback, recording or make settings in the menu
while viewing on your TV screen.
连接至 AV 设备
通过将 DVD 摄录机与电视机连接，您可以查看录制在大屏幕上的视频和照
片图像（仅适用于 SC-DX103/DX105）
。
与电视机连接
• 必须使用 NTSC 制式的电视机播放您录制的影
音文件。  第 102 页
• 我们建议您使用交流电源适配器为 DVD 摄像机
提供电能。
按照以下方法，使用提供的 AV 电缆将 DVD 摄像机
连接至电视机：
1. 将 AV 电缆末端的插头与 DVD 摄像机的 AV 接
口相连。
2. 将 AV 电缆的另一端视频插头（黄色）和左音频
插头（白色）/ 右音频插头插头（红色）与电视
机相连。
• 有关连接的更多信息，请参看电视机使用说明书。
• 在连接之前，请务必将电视机音量减小：因为电视机的喇叭会
发出很大的噪声。
• 将输入和输出电缆小心连接到与 DVD 摄像机一起使用设备的连
接处。
在电视屏幕上查看
1. 打开电视机，然后将输入选择器设置为连接 DVD 摄像机的输入连接处。
- 这通常称为“线” 。请参阅电视机说明书以了解如何切换电视输入。
2. 开启 DVD 摄像机。
- 向下滑动 POWER 电源开关，然后打开 LCD 显示屏。
- 设置为适当的存储介质。 ( 仅限 SC-DX103/DX105)
 第 30 页
- 按下 MODE 按钮设置为播放模式。 第 21 页
- 通过 DVD 摄像机查看的图像将出现在电视机屏幕上。
3. 进行播放
- 您可以在电视机屏幕上查看时进行播放、录制或设置菜单。
����
TV
Signal fl ow
AV cable
DVD camcorder
(AD68-02550F)SC-DX100_ENG+CHN_IB.indb 86 2008-03-05 ¿АИД 8:56:22