Samsung SCH-R970ZWAUSC - Manual (Page 141)

Scanning and Connecting to a Wi-Fi Network
1. Turn Wi-Fi on (see “Turning Wi-Fi On” on page 135).
Your phone scans for available hotspots and pops-up a
list of any it finds.
2. To connect to a hotspot, touch it on the pop-up list.
• If the Wi-Fi network is open, you will be automatically
connected.
• If the Wi-Fi network is secured, enter the password at the
prompt to connect.
Adding a Wi-Fi Network Manually
1. From the Home screen, touch Menu ➔
2. Touch Wi-Fi to turn on Wi-Fi.
refer to “Accessing Settings” on page 148.)
Wi-Fi options screen displays. ( For more information,
Settings ➔ Connections tab ➔ Wi-Fi. The
3. Touch Add Wi-Fi network, then enter the following
values:
• Network SSID: Enter the name of the WAP (Wireless Access
Point).
• Security: Select the type of security used by the WAP.
• Password: If the WAP is secured, enter the password or key.
4. Tap Connect.
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly
via Wi-Fi, without a Wi-Fi network or hotspot, and without
having to set up the connection. For example, some printers
support Wi-Fi Direct, and you could print from your phone via
Wi-Fi Direct.
Establishing Wi-Fi Direct Connections
1. From the Home screen, touch Menu ➔ Settings ➔
Connections ➔ Wi-Fi ➔ Wi-Fi Direct.
2. Touch Wi-Fi Direct.
The Wi-Fi Direct screen displays, and your phone scans
for available Wi-Fi Direct devices and lists them under
Available devices.
3. To connect to a single Wi-Fi Direct device, touch its
name in the list.
4. To connect to multiple Wi-Fi Direct devices, touch
Multi-connect, next touch Select all or individual
devices, then touch Done.
Connections 136