Samsung SCH-R970ZWAUSC User Manual
Page 107
Camcorder Controls
1. Auto Focus button: Indicates that the Focus Point has
been changed. Touch to return to default (image
center) Focus Point.
2. Recording Status indicator: Indicates whether recording
(as shown) or paused.
3. Recording Length counter: Indicates the current length
(in minutes and seconds) of this video.
4. Focal Point: Indicates the Camcorder focal point. To
change the focal point, touch a new point on the view
finder image. This causes the Auto Focus button to
appear.
5. Recording Size counter: Indicates the size of your
recording (in kilobytes).
6. Battery level indicator: Indicates the available battery
charge when the phone is connected to a charger.
7. Recording Stop button: Stops and saves the current
video recording and returns you to the Camera
viewfinder.
8. Recording Pause button: Interrupts the current video
recording. Replaced by the Recording Resume button.
9. Image Capture button: Touch to capture an image from
the video while recording. (Not available with Video
stabilization set to On.)
10. Gallery: Shows a thumbnail image of the last picture or
video you have taken or recorded. Touch to access the
thumbnail image or the Gallery (see “Gallery” on
Recording Videos
1. From the Home screen, touch
Menu
➔
Apps
➔
Camera
➔
to activate the camera mode.
Note: The camera may not be able to properly record videos to
a memory card with a slow transfer speed.
2. Using the camera’s main display screen as a
viewfinder, adjust the image by aiming the camcorder
at the subject.
3. Before you take a video, use the Volume control
buttons to zoom in or out. You can magnify the video up
to x4 (400 percent).
Applications and Widgets
102