Samsung SCH-L710RWBXAR - Manual (Page 144)

138
Connecting to Wi-Fi Direct Devices
1. First, enable Wi-Fi on your device. From the Home
screen, touch Menu ➔ Settings.
2. Slide Wi-Fi to the right to turn Wi-Fi ON.
Wi-Fi must be on to use Wi-Fi Direct.
3. Enable Wi-Fi Direct on the other device(s). Consult the
other device’s documentation for more information.
4. On your phone, touch Wi-Fi Direct (below the list of
networks) to scan for the other device(s).
5. In the Available devices list, touch a device to connect
with it, or touch Multi-connect to connect to multiple
devices (not all devices support multi-connect).
6. Follow the prompts on both devices to complete the
connection.
Beaming
NFC
NFC (Near Field Communication) allows data exchange when
you touch your device with another compatible device. This
is used for applications such as Android Beam and S Beam.
1. From the Home screen, touch Menu ➔ Settings ➔
Connections ➔ NFC
2. Slide NFC to turn NFC ON.
Note: NFC must be turned ON to use Android Beam or S Beam.
Android Beam
When Android Beam is activated, you can beam application
content to another NFC-capable device by holding the
devices close together. You can beam browser pages,
YouTube videos, contacts, and more.
Turning Android Beam On or Off
1. Turn NFC ON. NFC must be ON to use Android Beam.
2. From the NFC screen, slide Android Beam to
the right to turn Android Beam ON.
ON ON
ON ON
ON ON