Samsung SCH-L710RWBXAR - Manual (Page 139)

Connections 133
Scanning and Connecting to a Wi-Fi Network
1. Turn Wi-Fi on. See “Turning Wi-Fi On” . The phone
scans for available hotspots and displays a list of any it
finds.
2. To connect to a hotspot, touch it on the pop-up list.
• If the Wi-Fi network is open, you are automatically connected.
• If the Wi-Fi network is secured, enter the password at the
prompt to connect.
Adding a Wi-Fi Network Manually
1. From the Home screen, touch Menu ➔ Settings ➔
Connections ➔ Wi-Fi. The Wi-Fi options screen
displays. For more information, refer to “Accessing
Settings” on page 145.
2. Slide Wi-Fi to the right to turn on Wi-Fi.
3. Touch Add Wi-Fi network, then enter the following
values:
• Network SSID: Enter the name of the WAP (Wireless Access
Point).
• Security: Select the type of security used by the WAP.
• Password: If the WAP is secured, enter the password or key.
Bluetooth
Note: For Hearing Aid Compatibility Information, see page 212.
Bluetooth is a short-range wireless communications
technology for exchanging information over a distance of
about 30 feet.
You don’t need to line up the devices to send information
with Bluetooth. If the devices are in range, you can exchange
information between them, even if they are in different
rooms.
Configuring Bluetooth Settings
Configure the phone’s Bluetooth settings. For more
information, see “Bluetooth Settings” on page 150.
Note: Bluetooth profiles are specifications for services
supported by individual devices. For a list of profiles the
phone supports, see “Bluetooth Profiles” on page 149.
ON ON