Operation instructions for mdc dryers, Step 1: clean lint filter, Step 2: load laundry – Alliance Laundry Systems D677I User Manual
Page 50: Step 3: close loading door, Step 4: set fabric selector

Operation
510969
48
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation Instructions for MDC
Dryers
IMPORTANT: Before using dryer for the first time,
use an all-purpose cleaner, or a detergent and
water solution, and a damp cloth to remove
shipping dust from inside of dryer drum.
IMPORTANT: Remove all sharp objects from
laundry to avoid tears and rips to items during
normal machine operation.
Step 1: Clean Lint Filter
Clean lint filter before each use.
Figure 47
Step 2: Load Laundry
Load clothes loosely into dryer drum. Add fabric
softener sheet if desired.
Figure 48
Step 3: Close Loading Door
Close loading door. Dryer will not operate with the
door open.
Figure 49
Step 4: Set Fabric Selector
Select HIGH TEMP, MED TEMP, LOW TEMP or
DELICATES by pushing touchpad.
NOTE: Always follow manufacturer’s care label
instructions.
Figure 50
D608I
D609I
D608I
D609I
D688I
DRY1926N
D688I
DRY1926N