Alliance Laundry Systems D677I - Manual (Page 22)

Installation
510969 20 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 5: Wipe Out Inside of Dryer
Before using dryer for the first time, use an all-purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside dryer drum.
Figure 14
Step 6: Plug In the Dryer
Refer to section on Electrical Requirements, and
connect the dryer to an electrical power source.
Figure 15
Step 7: Check Installation
Refer to Installer Checklist on back cover and make
sure that dryer is installed correctly.
D604I
D604I
D275I
D254I
ELECTRIC
Connect to 30 Amp circuit.
D254I
GAS
Plug cord into separately fused 15 Amp circuit.