Alliance Laundry Systems D677I - Manual (Page 47)

Operation
45 510969 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation Instructions for
Electronic Display Control Dryers
IMPORTANT: Before using dryer for the first time,
use an all-purpose cleaner, or a detergent and
water solution, and a damp cloth to remove
shipping dust from inside of dryer drum.
IMPORTANT: Remove all sharp objects from
laundry to avoid tears and rips to items during
normal machine operation.
Step 1: Clean Lint Filter
Clean lint filter before each use.
Figure 40
Step 2: Load Laundry
Load clothes loosely into dryer drum. Add fabric
softener sheet if desired.
Figure 41
Step 3: Close Loading Door
Close loading door. Dryer will not operate with the
door open.
Figure 42
Step 4: Set Fabric Selector
Select NORMAL (High Temp), PERM PRESS (Med
Temp), DELICATES (Low Temp) or TUMBLE (No
Heat) by pushing touchpad.
NOTE: Always follow manufacturer’s care label
instructions.
Figure 43
D608I
D609I
D608I
D609I
D688I
D294I
D688I
D294I