Campbell Scientific PS200/CH200 12 V Charging Regulators User Manual
12 v charging regulators
Table of contents
Document Outline
- Revision and Copyright Information
- Warranty
- Assistance
- Table of Contents
- 1. Introduction
- 2. Precautions and Tips
- 3. Quick Start
- 4. Specifications
- 5. Operational Overview
- 6. User Interface
- 6.1 Configuring the PS200/CH200 Using Campbell Scientific Device Configuration Utility (DevConfig)
- 6.2 SDI-12
- 6.3 RS-232 Interface
- 6.3.1 Text Based Interface
- 6.3.2 RS-232 Communications with a Campbell Scientific Datalogger
- 6.3.3 RS-232 Host (Datalogger) Command Strings and PS200/CH200 Response Strings
- 6.3.3.1 Read Status
- 6.3.3.2 Write Remote Battery Temperature to PS200/CH200
- 6.3.3.3 Restore Internal Battery Temperature Measurement
- 6.3.3.4 Change Battery Capacity Value in PS200/CH200
- 6.3.3.5 Enter Battery Test State
- 6.3.3.6 Zero Out Qloss
- 6.3.3.7 Read Special PS200/CH200 Settings and Variables
- 6.3.3.8 Power Usage
- 6.3.4 Datalogger Programming for RS-232 Communication to the PS200/CH200
- 7. Charging Details
- 8. A100 Null Modem Adapter
- 9. A105 Additional 12 V Terminals Adapter
- 10. References
- Appendix A. Advanced Programming Techniques
- A.1 Write/Reset Remote Battery Temperature
- A.1.1 Write/Reset Remote Battery Temperature SDI12 Programming Example
- A.1.2 Write/Reset Remote Battery Temperature RS-232 Programming Example
- A.1 Write/Reset Remote Battery Temperature
- Campbell Scientific Companies