Campbell Scientific PS200/CH200 12 V Charging Regulators - Manual (Page 31)

PS200/CH200 12 V Charging Regulators
The bottom of the Settings Editor displays help for the selected setting. The
Apply and Cancel button will become active when a setting is changed. An
asterisk (*) will also appear next to values that have been changed.
Clicking the Factory Defaults button on the Settings Editor will send a
command to the PS200/CH200 to revert to its factory default settings
(PS200/CH200 factory made calibration values and other “read only” values
are not affected).
The Read File can be used for restoring settings from a file that was created
earlier. The settings from the saved file are immediately sent to the
PS200/CH200.
Edit settings as needed, click on the Apply button; or, if no changes were
made, click on the Summary button; and, if the PS200/CH200 accepts the
settings, a configuration summary dialogue will appear. The user will have a
chance to save the settings so that Read File can be used later and/or print the
settings for the device:
Click on the Ok button to return to the settings editor if no changes were made
or to the main screen if changes were made.
23