Agilent Technologies Switch/Measure User Manual

Page 95

Text mode
Original mode

Features and Functions

34980A User’s Guide

Domain Name

A domain name is a registered name on the Internet, which is translated
into an IP address. This feature is available from the remote interface only.

If you change the Domain Name, you must cycle power on the 34980A to
activate the new setting.

• If Dynamic Domain Name System (DNS) is available on your network

and your instrument uses DHCP, the Domain Name is registered with
the Dynamic DNS service at power- on.

• If DHCP is enabled, the DHCP server can change the specified

Domain Name.

• The Domain Name is stored in non- volatile memory, and does not

change when power has been off, after a Factory Reset (

*RST

command), or after an Instrument Preset (

SYSTem:PRESet

command).

Remote Interface Operation:

SYSTem:COMMunicate:LAN:DOMain "<name>"