Kenwood TM-D710GE - Manual (Page 89)

85
MCP-2A/6A Memory Control Program 08
Configuring How Memory Channels Display
Using “Range of Standard Memory Channel” in the Setup pulldown menu, it can be configured whether memory
channels are displayed for configuration in groups of 100 or whether all memory channels are displayed in one window.
Memory Channel Shortcut
The memory channel shortcut can be used as follows:
• Double‑click “Free Memory Channel: xxxx/1000” on the Status bar (see Fig. 8‑8 Memory Channel Shortcut). The Memory
Channel window will appear.
The memory channel shortcut can be used as follows:
Furthermore, if the following action is done, the configuration window will open to allow configurations to be entered:
• Double-click “Offset/ Tx Freq.”, “Plus/ Minus Shift/ Split”, “T/CT/DCS” sections on the Status bar (see Fig. 8‑8 Memory Channel
Shortcut) to edit the channel configurations. The Channel Edit window will appear.
Fig. 8-8 Memory Channel Shortcut
COM Port Shortcut
Double‑click the “COM x” or “bps : xxxx” sections on the Status bar (see Fig. 8‑8 Memory Channel Shortcut). The COM
Port Setting window will appear.