Kenwood TM-D710GE - Manual (Page 86)

82
08 MCP-2A/6A Memory Control Program
Memory Channels
Memory Channels
It is possible with TM-V71A/E and TM-D710A/E to configure even those memory channels created with MCP. In
addition, for the usual memory channels, arranging the order of channels via a sorting feature can be done.
Weather/ Train Channels
It is possible to program train channels, if using a J‑type (Japan) transceiver model; or you can program weather
channels, if using a K‑type (U.S.A. and Canada) transceiver model.
EchoLink Memory Channels
It is possible with TM-V71A/E and TM-D710A/E to configure even those EchoLink channels created with MCP.
Menu Settings
Transceiver Menu > EchoLink RX Monitor
When using the transceiver in EchoLink Sysop mode, output from the speaker and output to the data terminal can be
configured. This function is only possible to configure with the MCP-2A.
Transceiver Menu > Repeater Mode (K-type only)
It is possible to configure the transceiver as a cross-band repeater. When the transceiver is configured to be a repeater,
there is a function that transmits the repeater’s own ID. You can configure the ID transmission method and choose
between Off, Morse code or Voice. When Voice is selected, it is necessary to install the optional VGS-1 Voice Guidance
and Storage unit. The combined use of cross‑band repeater with the external remote function is not possible. The
cross‑band repeater function is only available on a K‑type (U.S.A. and Canada) model.
Transceiver Menu > Password
It is possible to configure the character string for the password. This function is only possible to configure with the
MCP‑2A.
Transceiver Menu > 10 MHz Mode
Configure whether you will use the 10 MHz step variable function.
Transceiver Menu > TM-D710A/E
This item can only be configured with TM-D710A/E.
Transceiver Menu > RC-D710
This item can only be configured with RC-D710.