Kenwood TM-D710GE User Manual
Page 81
77
MCP-2A/6A Memory Control Program 08
2 Download the newest version of MCP‑2A from the KENWOOD web site URL shown below (URL is subject to
change). MCP‑2A download location:
http://www.kenwood.com/i/products/inf
3 Click the icon of the downloaded software.
Follow the Wizard installation instructions presented on screen.
Fig. 8-2 Windows Vista User Account Control Window
4 Click “Start” > “Program” > “KENWOOD” > “MCP‑2A” to start MCP‑2A.
When MCP‑2A starts, the transceiver model is requested. Select the correct transceiver model and click the “OK” button.
You can modify the model later if necessary.
Fig. 8-3 MCP‑2A Product Select Window
5 Select the communication port and data rate.
Specify in the COM Port frame the COM port that will be used to communicate via your computer with the target station.
You cannot select grayed out ports. If all ports are grayed out, this indicates your computer has no COM ports installed and
you will not be able to use the MCP‑2A software even if you click the “OK” button.
Fig. 8-4 MCP‑2A COM Port Setting Window