Kenwood TM-D710GE - Manual (Page 101)

97
How to Update Firmware 09
How to Get Newest Firmware/Software
Download the newest version of update software from the KENWOOD web site URL shown below (URL is subject to
change).
http://www.kenwood.com/i/products/info/amateur/software_download.html
How to Update
Carefully read the update instructions provided when you download the software. Begin the procedure only after you
understand the provided instructions.
Table 9-6 Firmware Update Summary Table
Item to Update Files Required Remarks
TM‑V71A/E
TM‑D710A/E
Main Unit
TM‑V71_TM‑D710_Main_VxxxE.zip The updater cannot be used for TM‑D710GA/GE
TM‑D710GA/GE
Main Unit
TM‑D710G_Main_VxxxE.zip
The updater cannot be used for TM‑D710A/E or
TM‑V71A/E.
TM‑D710A/E
RC‑D710
Operation Panel
TM‑D710_RC‑D710_OpPanel_VxxxE.zip
The updater cannot be used for TM‑D710GA/GE.
The updater file can also be used for RC-D710.
TM‑D710GA/GE
Operation Panel
TM‑D710G_OpPanel_VxxxE.zip
The updater cannot be used for TM‑D710A/E or
RC‑D710.
TM‑D710A/E
TM‑D710GA/GE
RC‑D710
TNC
TM‑D710_RC‑D710_Tnc_VxxxE.zip
Note:
◆ During a routine update, there are times when automatic resets are executed. Therefore, ensure you back up all values and
channel data prior to beginning the firmware update.
◆ To restore the backup data, confirm all data is correct using on MCP-2A/6A prior to writing data back to the transceiver.
◆ The software update for the operation panel and main unit of the TM‑D710GA/GE is not available on the web site. The current
firmware version is 1.00 as of December 2013, and has not been upgraded from the original firmware version