Setting audio levels, Adjusting receive volume – Kenwood TM-D710GE User Manual

Page 65

Text mode
Original mode

EchoLink 07

Setting Audio Levels

Before starting to make QSOs, first connect to the Test Server and configure the correct receive volume.

Fig. 7-21 Connecting to EchoLink Test Server

There are two ways to connect to the Test Server as follows:

• Select “Connect to Test Server” from the Station pulldown menu.
• Select the *ECHOTEST* conference and click the “Connect” button (upper left corner of screen).

“Connecting to *ECHOTEST*...” will appear. Once connected, you will hear an announcement from the test server that

begins: “Welcome to the EchoLink Test Server...”.

Adjusting Receive Volume

Adjust the receive volume of the announcement audio from the test server.
Select “Adjust Sound Device” > “Playback...” from the Tools pulldown menu.

Fig. 7-22 Receive Volume Menu Selection

Adjust the appropriate volume control using the test server announcement.