ARI Armaturen ARI-PREMIO Plus EN - Manual (Page 34)

Page 34 0040501004 5010
Operating and installation instructions
Thrust actuator ARI-PREMIO-Plus
If a position is programmed for a switched Force switch, e.g. in a final position, the
corresponding relay is only switched if this Force switch is actuated, regardless of the
position. This can be the case if a blockage occurs, for instance. A blockage additionally
results in a "Failure" signal because the desired position cannot be reached.
5.7.1.2 Technical data
5.7.1.3 Installation procedure
5.7.1.4 Electrical connection
Bild 19
Type
Relay
1 Position
2 Position 3 Warning 4 Failure
Switching capacity: U
B
6 A / 250 V~ 2 A / 30 V AC/DC~
Max. conductor cross-section 2.5 mm² 1.5 mm²
Contact material Gold Gold
Storage temperature -40°C to +85°C
Operating temperature -20°C to +70°C
Fig. 17 Fig. 18