ARI Armaturen ARI-PREMIO Plus EN - Manual (Page 22)

Page 22 0040501004 5010
Operating and installation instructions
Thrust actuator ARI-PREMIO-Plus
5.3.3 Setting dimensions for guiding stem
ARI-PREMIO-Plus 2,2 -5 kN ARI-PREMIO-Plus 12 - 15 kN
Yoke version
Fig. 10 -A
Column version
Fig. 10-B
Column version
Fig. 10-C
Fig. 10-D
1. groove
2. groove
1. groove
Hexagon nut
Valve stem
ATTENTION !
for X = 60/83 mm --> 1. groove
for X = 98 mm --> 2. groove
only for travel Hub 65 mm:
At valve travel of 65 mm and X = 98 mm with
additional stem adapter M20/M16 use also the 1.
groove.
At a valve travel of 65 mm observe that a very
accurate adjustment range is required;
Tolerance: 65 0,5mm
+-