ARI Armaturen CONA S PN40 EN - Manual

Rev. 0040805002 1404 englisch
1.0 General information on operating
instructions.................................................... 2
2.0 Notes on possible dangers............................ 2
2.1 Significance of symbols ..........................................2
2.2 Explanatory notes on safety information .................2
3.0 Storage and transport ................................... 2
4.0 Description...................................................... 3
4.1 Scope of applications ..............................................3
4.2 Operating principles ................................................3
4.3 Diagram...................................................................4
4.4 Technical data - remarks .........................................5
4.5 Marking ...................................................................5
5.0 Installation....................................................... 5
5.1 General notes on installation...................................5
5.2 Installation instructions for welding .........................6
5.3 Controller adjustment ..............................................6
5.4 Steam trap testing through ultrasonic
measurement ..........................................................6
5.5 Installation position..................................................7
5.5.1 Possible installation positions .................. 7
5.5.2 Installation with pressure compension line 8
6.0 Putting the valve into operation ................... 8
7.0 Care and maintenance................................... 9
7.1 Cleaning/replacing controller assembly.................. 9
7.2 Changing the installation position......................... 10
7.3 Options blow down valve / manual air vent valve..11
7.4 Union for pressure compension line /
external vent..........................................................11
7.5 Tightening torques................................................ 12
8.0 Troubleshooting ........................................... 12
9.0 Troubleshooting table ................................. 13
10.0 Dismantling the valve or the body ........... 14
11.0 Warranty / Guarantee ................................. 14
12.0 EC declaration of conformity .................... 15
Operating and installation instructions
Ball float steam traps
CONA
®
S (PN16 - 40)
Contents
PN16
- with flanges (series 630....1)
PN40
- with flanges (series 630....1)
- with screwed sockets (series 630....2)
- with socket weld ends (series 630....3)
- with butt weld ends (series 630....4)