Vaisala WMT700 - Manual (Page 49)

Chapter 3 _______________________________________________________ Functional Description
Protocols
In addition to the protocols preconfigured under standard profiles,
there are additional protocols available in WMT700. The protocol
used is defined by related parameters. For more information, see
Parameter Handling Commands on page 111. The full list of
supported protocols is:
- WMT700
- WMT700 NMEA MWV
- SDI12
- WS425 - ASOS
- WS425 - ASCII
- WS425 - NMEA Standard
- WS425 - WAT11
- MES12
Measurement and Configuration
Modes
The serial ports have the following operation modes:
- The configuration mode is used for configuring the WMT700
settings over a serial connection. The selected communication
profile does not affect the available configuration commands.
- The measurement mode is used for operating WMT700. In the
measurement mode, the available commands depend on the
selected profile. The port that is in the measurement mode can
receive polling commands and respond to them with data
messages.
For a list of all serial commands supported by WMT700 in the
configuration and measurement modes, see Appendix A,
Complete Command Set for WMT700, on page 195.
VAISALA ________________________________________________________________________ 47