Vaisala WMT700 - Manual (Page 156)

User's Guide ______________________________________________________________________
WS425 A/B NMEA Standard Profile
When the WS425 A/B NMEA Standard profile is configured,
WMT700 sends messages based on the configured automatic
message interval. There are no operating commands available for
the user.
Configurable Parameters
Table 46 below lists the configurable parameters and their
allowed and default values for the WS425 A/B NMEA Standard
profile.
Table 46 Configurable Parameters for WS425 A/B
NMEA Standard Profile
Parameter Default Value Profile-Specific Allowed
Values
Description
address 1 String with 1 character Address for WMT700
autoInt 1 0.25 ... 1000
Resolution: 0.25 Automatic message interval in
seconds. Do not select a message
interval that is shorter than the time it
takes to send a data message
autoPort 1 1 = COM1 port
2 = COM2 port Serial port to which WMT700 sends
automatic data messages
autoSend 0 0 = Automatic messages
disabled
19 = NMEA automatic
data message Automatic data message number.
Selects the data message format for
automatic messages
com1_protocol 0* 4 = WS425 A/B NMEA
Standard Profile for serial port COM1
com2_protocol 0 4 = WS425 A/B NMEA
Standard Profile for serial port COM2
com2_interf N/A** 0 = RS-485
1 = RS-422
3 = RS-232 Interface for serial port COM2
wndAvg 1 0.25 … 3600
Resolution: 0.25 Averaging time for wind
measurement in seconds
wndOrientation 0 0 = Array facing up
1 = Array facing down Orientation of the array of WMT700
wndUnit 0** 0 = Meters per second
1 = Miles per hour
2 = Kilometers per hour
3 = Knots Wind speed unit
wndVector 1 0 = Scalar averaging Wind averaging method
* The parameter has no protocol-specific default value. It is determined
separately in the configuration code.
** Wind speed unit and COM2 digital communication interface are defined in
the order form. Default setting may be any of the allowed options, and it can be
verified from the unit’s configuration code.
154 __________________________________________________________________ M211095EN-E