Vaisala WMT700 - Manual (Page 101)

Chapter 4 ________________________________________________________________ Installation
Wiring in Retrofit Installations
There are two ways of performing WMT700 retrofit installation:
- Using Standard WMT700 Cables
- Using WS425 Cables with adapters
NOTE To avoid unnecessary connectors and maximize long-term reliability,
Vaisala recommends that you use the WMT700 cable for the retrofit
installation.
Using Standard WMT700 Cables
This is the recommended way for the retrofit installation. There
are various cables available for the installation:
- Cable 2 m (227567SP)
- Cable 10 m (227568SP)
- Cable 15 m (237890SP)
- Cable 26 m (237889SP)
- RS485 Cable 2 m (228259SP)
- RS485 Cable 10 m (228260SP)
- ROSA Cable 10 m for Analog Outputs (231425SP)
- MAWS Cable 10 m (227565SP)
- AWS520 Cable 10 m, Shield connected to PE pin (229807SP)
- AWS520 Cable 10 m, Shield not connected to PE pin
(227566SP)
VAISALA ________________________________________________________________________ 99