Vaisala WMT700 - Manual (Page 151)

Chapter 5 _________________________________________________________________ Operation
WS425 F/G ASOS Commands
WMT700 responds to each command with a fixed-length
message. In each of the command descriptions below, is an
ASCII carriage return control character and is an ASCII
line feed control character.
NOTE When the WS425 F/G ASOS profile is selected, WMT700 only responds
to upper case characters.
Table 44 below lists the available commands for operating
WMT700 with the WS425 F/G ASOS profile.
Table 44 WS425 F/G ASOS Commands
Command Description
WA Requests average wind speed and direction message
WS Requests the verbose Built-In Test (BIT) results
The WA command is executed by the ASOS at an interval that
ranges from 1 to 30 seconds. For the WA command, WMT700
responds to the ASOS interrogation poll within 250 milliseconds
of receiving the request.
NOTE The following WS425 F/G ASOS commands cannot be used with
WMT700: WB, WFIRMWARE, WJ, WD, WF, WR, WCAL, WH,
WT, WCDV, WSTK, WL, WM, WN, WSST, and WATE.
WMT700 can only be configured in the configuration mode. For a list of
configuration commands for WMT700, see section Configuration on
page 110.
VAISALA _______________________________________________________________________ 149