Filtering commands, P, t and rh compensation commands, Device handling commands – Vaisala GMP343 User Manual

Page 92: Device information display commands

User’s Guide ______________________________________________________________________

90 ___________________________________________________________________M210514EN-E

Filtering Commands

P, T and RH Compensation Commands

Device Handling Commands

Device Information Display Commands

AVERAGE

Set the averaging filter

SMOOTH

Set the smoothing filter

MEDIAN

Set the median filter

RESYNC

Flush (clear) all the filters

Set local pressure (hPa) for compensation

Pressure compensation mode

Set local humidity (% RH) for compensation

RHC

Humidity compensation mode

Temperature compensation mode

Set the oxygen for compensation

Oxygen compensation mode

Set local pressure (hPa) for compensation (POLL-mode)

Set oxygen for compensation (POLL-mode)

XRH

Set local humidity (% RH) for compensation (POLL-mode)

RESET

Reset device

FACTORY

Revert the factory parameters

SAVE

Save parameters to EEPROM

Output the information about the device

Output the information about the device in POLL-state

CALCS

Display measured parameters

CORR

Display linear and multipoint corrections

ERRS

List the error messages

HELP

List the commands on the current level