Structure of the mi70 indicator, Figure 5 – Vaisala GMP343 User Manual
Page 21
Chapter 2 __________________________________________________________ Product Overview
VAISALA_______________________________________________________________________ 19
1.
Plug in the recharger connector into the connector on top of the
indicator and connect the recharger to a wall socket. A battery symbol
in the corner of the display starts to roll.
-
It is not recommended to use MI70 during the first recharging.
Later on MI70 can be used while recharging.
-
Duration of recharging depends on the charge level of the battery
pack being 4 hours typical. The recommended first recharging
time is 6 hours.
2.
The battery pack is full when the battery symbol in the display stops
rolling.
3.
Disconnect the recharger.
Structure of the MI70 Indicator
Figure 5
Structure of the MI70 Indicator
The following numbers refer to Figure 4 above:
1
=
Recharging connector
2
=
Power On/Off key
3
=
Connection cable (DRW216050SP) for GMP343 connection