Chapter 4 operation, Connecting gmp343 to pc, Connection cables – Vaisala GMP343 User Manual
Page 29: Installing the driver for the usb cable, Chapter 4, Chapter 4, operation: th, Chapter 4, operation, on, Operation

Chapter 4 ________________________________________________________________ Operation
VAISALA_______________________________________________________________________ 27
CHAPTER 4
OPERATION
This chapter contains information that is needed to operate the GMP343.
Connecting GMP343 to PC
Connection Cables
To connect the GMP343 to a PC, you need the PC Connection Cable
(optional accessory 213379). If your PC does not have a serial port, you
also need the USB-D9 Serial Connection Cable (optional accessory
219686). By connecting the two cables, you can use a standard type A USB
port to connect the GMP343 to a PC.
Both cables are included in the PC Connection Kit that can be ordered with
the GMP343.
Installing the Driver for the USB Cable
Before taking the USB cable into use, you must install the provided USB
driver on your PC.
1.
Check that the USB cable is not connected. Disconnect the cable if
you have already connected it.
2.
Insert the media that came with the cable, or download the latest
driver from
www.vaisala.com
.
3.
Execute the USB driver installation program (setup.exe), and accept
the installation defaults. The installation of the driver may take several
minutes.