EOTech MIPIM (AN/PEQ-16B) - Mini Integrated Pointer Illuminator Module - Manual (Page 41)

2-15
2.7 MODES OF OPERATION - Continued
Mode Selection
WARNING
The Class 1 and 3R lasers (low power) described
in Table 2-5 may be used in force-on-force training
only if the opposing operators are beyond the
NOHD and NSHD values shown in Table i-1.
WARNING
The Class 3B lasers (high power) described in
Table 2-5 shall NOT be used in force-on-force
training.
WARNING
To prevent inadvertent activation of the laser(s) or
white light energy, the Mode Selector should be in
the O (OFF) position when not in use.
Modes of operation are accessed by turning the Mode
Selector to the desired position.
Figure 2-6 Mode Selector
MODE
SELECTOR