EOTech MIPIM (AN/PEQ-16B) - Mini Integrated Pointer Illuminator Module - Manual (Page 36)

2-10
2.5 BORESIGHTING PROCEDURES
The MIPIM incorporates a factory preset feature that may be
used to quickly bring the co-aligned lasers nearly parallel
with the barrel of the host weapon.
CAUTION
Do not force the adjusters beyond their end of
travel.
To establish this preset, rotate the Boresight Adjusters to the
full CCW end of travel, then rotate them back CW three
complete turns. Finally, place a positive load on the
adjusters by turning each adjuster 1/2 turn CCW.
The MIPIM may also be boresighted to the host weapon
using a Laser Borelight System (LBS). Table 2-4 provides
10m Target Offsets for this purpose. Refer to the latest
version of the LBS Operator Manual for boresighting
procedures.
The following abbreviations and their definitions apply to the
last two columns of Table 2-4:
L Left R Right
U Up D Down
VIS Visible Aim Laser IR IR (Infrared) Aim Laser